Course Finder
Not sure where to start? We'll help you find the right course.
All courses
Showing 111-121 of 359 courses
Industrial
Radiation Awareness / Isolation for Fixed Gauges
The 7 hour Gauge Isolation/Awareness Course is intended to provide a sufficient level of knowledge to enable the operator to comfortably work around fixed radiation gauges and should understand why certain procedures are required to be carried out.
Health and Safety
PUAFER008 - Confine Small Emergencies in a Facility (Fire Extinguisher)
This course involves the skills and knowledge required to confine small emergencies in a facility and it applies to occupants who are required to have first attack firefighting skills. It includes preparing for emergency situations, identifying and assessing an emergency, safely confining emergencies, using initial response equipment and reporting on the facility's emergency response.Small emergencies in a facility include incidents such as small fires that can be controlled using a fire extinguisher; chemical spills that can be controlled using facility personal protective clothing and equipment and a spill kit; or a vehicle accident where there is no significant injury or damage.This course has been developed to cover the facilities as specified in Australian Standard AS3745 and AS4083. For this course, as covered by AS3745 and/or AS4083, occupants are people attending a facility on a permanent or temporary basis such as an employee, contractor, student or resident, but not a visitor or patient and a facility is a building, structure or workplace that is, or may be, occupied by people (occupants).All aspects of this course must be undertaken in line with legislative requirements, organisational policies and procedures, and accepted safe work practices.Assessment:A Theory Assessment with multiple choice and short answer questionsPractical Assessments, with tasks including:A prestart inspection on a fire extinguisherCorrect use of portable fire extinguishersCorrect use of a fire blanket
Industrial
Portable Gauging Devices
The aim of this course, a pre-requisite to obtaining a licence, is to train persons who intend to operate portable gauges (moisture and density), in principles of radiation safety. Operators are required to hold a licence in compliance with State Legislation.Area of Industry Served:Any application using portable gauges for purposes such as density and moisture content indication.
Industrial
NORMs Radiation Awareness
This one-day NORM awareness course is intended to provide basic information on radiation protection so that the operator can work confidently and to understand why certain procedures are required to be followed.
Industrial
Industrial Radiography
The aim of this course, a pre-requisite to obtaining a licence, is to train persons who intend to operate industrial radiography equipment, in principles of radiation safety. Operators of this equipment are required to hold a licence in compliance with State Legislation.Area of Industry Served:Industrial radiography using x-ray equipment or radioactive sources.Upon successful completion of this course, learners:Should be able to successfully pass the *Radiological Council’s qualifying examination conducted by SGS Radiation ServicesWill possess the skills and knowledge to competently operate industrial radiography equipment and minimise doses received to such a level that the hazards are below the statutory limits* Please note that the examination is set by and marked by the WA Radiological Council who will directly advise the participant of their mark. Licences are issued only by the WA Radiological Council.
Industrial
Gamma Irradiator (Self Contained) Use
The three and a half days Gamma Irradiator (Self Contained) course is designed to equip the lto effectively manage all aspects as required for the safe use Gamma Irradiator (Self Contained) sources.Candidates are required to undertake qualifying examinations at the end of the course. After passing the examination, candidates will be able to apply for Gamma Irradiator (Self Contained) license from the Radiological Council of WA.
ISO 13485 – Medical Devices
WHO Good Distribution Practices (GDP) for Pharmaceutical and Medical Devices Industries Internal Auditor Training Course
The objective of this course is to provide learners with the knowledge and skills required to perform an internal audit of part of a WHO GDP requirement as well as in accordance with ISO 19011:2018 as applicable and contribute to the continual improvement of the management systems.The course covers the following content:Introduction to GDPGDP basic requirements - hardwaresGDP basic requirements - softwaresValidation and qualificationOther good practicesAudit definitions, types and principlesRoles and responsibilities of auditorsPreparing for the internal audit, conducting the audit and audit review
ISO 13485 – Medical Devices
WHO Good Distribution Practice (GDP) Introduction Training Course
Through a series of interactive sessions and hands-on workshops, become familiar with the World Health Organisation (WHO) Good Distribution Practices (GDP) for Pharmaceutical and Medical Device Products, in order to help you ensure compliance.
Process Improvement
Management Systems Documented Information Training Course
Managing management system (MS) documented information, which includes documents and records, is a challenging task for anyone involved to ensure its conformance and effectiveness.The purpose of this course is to provide you with an understanding and an insight into the documented information requirements of any management system (MS), e.g. ISO 9001, ISO 14001, 45001, etc. However, this course does not address MS standards in detail.Course ContentOverview of management systemsManagement system document requirementsControl and manage documented informationWriting work instructions / SOPs
Digital Trust
ISO/IEC 27002:2022 Information Security, Cybersecurity and Privacy Protection - Information Security Controls - Changes and Implementation Training Course
A comprehensive review of the new and changed controls found in the ISO/IEC 27002:2022 including an in-depth examination of the application of the control of newly introduced attributes that facilitate the application of controls.Course Content:ISO/IEC 27002:2022 overview of changes.Understanding clause 5 controls in treating risks, governance and the use of cloud services, including the relationship to other ISO/IEC standards.Clauses 6 controls relating to risks related to physical objects.Clause 8 and the purpose of the new controls in treating risks relating to technology.Prior Knowledge:It will benefit participants if they have knowledge of the following principles and concepts:ISO/IEC 27002:2013 Information Security Controls.ISO/IEC 27001:2013 Information Security Management System Implementation and Maintenance.Maintenance of information security, compliance, risk, or governance in an organisation.
Digital Trust
ISO/IEC 27001:2022 Information Security, Cybersecurity and Privacy Protection - Information Security Management Systems (ISMS) Transition Training Course
The purpose of this course is to provide you with an understanding of the differences between ISO/IEC 27001:2013 and ISO/IEC 27001:2022, and helps you explore how to assess your present ISMS with regard to the changes.Course Content:Changes to the requirements of ISO/IEC 27001:2022ISO/IEC 27002:2022 overview; new and changed controlsISO/IEC 27001:2022 clause 5ISO/IEC 27001:2022 clauses 6 and 7ISO/IEC 27001:2022 clause 8Prior Knowledge:This course is intended for anyone seeking to remain up to date with ISO/IEC 27001 or responsible for transitioning an ISMS from ISO/IEC 27001:2013 to ISO/IEC 27001:2022.
About us
Welcome to SGS Academy (RTO# 2646) and thank you for choosing us for your training needs. A full list of our courses can be found on our website https://academy.sgs.com/au and our accredited training scope can be found on the national register https://training.gov.au/Organisation/Details/2646