All courses

All electrical work, including repair, installation and alteration is to be undertaken strictly in accordance with the Work Health and Safety (Mines and Petroleum Sites) Regulation 2022 and associated Australian standards and site standards of engineering practice. This course will inform you of the specific standards and responsibilities that are relevant for authorisation as a low voltage electrical tradesperson in the mining industry.On completion of this training course, you will have an understanding of:Electrical tradesperson requirementsElectrical test and equipment requirementsAustralian standards and legislationThe course covers the following topics:Legislation and compliance documentationIP ratingsVoltage definitionsElectric shock protocolsPower restoration requirementsLighting plants, generators and welding machinesElectrical testing on energised low voltage equipmentAuto electrical equipmentElectrical installation modificationsPortable electrical equipmentElectrical test equipment and maintenanceArc flash and PPE requirements

This course is designed to provide participants with the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) on a person who is unconscious and not breathing normally in line with Australian Resuscitation Council (ARC) Guidelines.Course Content:DRSABCD action planManaging the unconscious breathing casualtyCardiopulmonary resuscitation (CPR) stepsPrinciples and legalities of CPRInfection controlDemonstration and use of an Automated External Defibrillator (AED)Hazards and risk managementAssessment:This course includes the following competency-based assessments:A Theory Assessment with multiple choice questionsPractical Assessment, with tasks including:Perform at least 2 minutes of uninterrupted single rescuer cardiopulmonary resuscitation (CPR) (5 cycles of both compressions and ventilations) on an adult resuscitation manikin placed on the floor.Perform at least 2 minutes of uninterrupted single rescuer CPR (5 cycles of both compressions and ventilations) on an infant resuscitation manikin placed on a firm surface.Follow the prompts of an automated external defibrillator (AED)Manage the unconscious breathing casualtyRespond appropriately in the event of regurgitating or vomiting

This course is designed to provide participants with the skills and knowledge required to apply risk management processes, conduct work related health and safety investigations as a result of an incident and to contribute to a safe workplace and communicate in the workplace in the mining, drilling and civil infrastructure industry.Course Content:Apply risk management processPlan and prepare for risk managementIdentify and assess unacceptable riskIdentify and recommend risk controlsContribute to the implementation of risk controlsReview risk management documentationConduct safety and health investigationsDetermine the objectives and develop investigation planGather informationEvaluate informationIdentify courses of actionPrepare and present investigation reportsCommunicate informationPlan and prepare to communicate informationCommunicate information to achieve work activity outcomesDevelop and perform work activity presentationParticipate in resolving conflictsPlease note: Lunch is catered for this course. Please contact us if you have any dietary requirements.​​​​Assessment:A Theory Assessment with short answer questionsA Practical assessment that includes:Two workplace incident investigationsTwo Risk AssessmentsTwo Toolbox Talk/MeetingsConflict Management ScenariosUsing Electronic Communication Systems

This course is designed to provide participants with the skills and knowledge required to carry out risk management processes, including planning, identifying hazards and assessing risk, and developing and implementing risk controls.Course Content:Plan and prepare for implementing the risk management processIdentifying workplace hazardsAssessing workplace risks and Identifying unacceptable risk levelsIdentifying potential actions and developing risk controlsImplementing and evaluating risk controlsAuditing the risk management process and completing recordsPlease note: Lunch is catered for this course. Please contact us if you have any dietary requirements.Assessment:A Theory Assessment with short answer questionsA Practical assessment that includes:Planning and preparing for the risk management processTwo Risk AssessmentsTwo Risk Assessment AuditsUndertaking routine hazard identification and analysisA loss scenarioFacilitating the risk management process

This course is delivered over five days with the content of each day building on the previous. Below is an overview of the five-day course.Day one provides an overview of the WHS legislative framework, duties of various parties and key terminology. It also covers the role of SafeWork NSW and penalties for non-compliance.Day two covers the requirements for consultation in the workplace on work health and safety issues and the mechanisms available. The role of HSRs and Health and Safety Committees (HSCs) and other available mechanisms are discussed as well as entitlements and protections.Day three examines the consultative approach that can be used in resolving workplace health and safety issues through negotiation and conflict resolution and the skills HSRs can utilise to achieve successful outcomes. It also provides learners with the skills and knowledge to identify hazards and ways in which they can be eliminated or minimised.Day four builds on the outcomes of day three with several practical exercises. It addresses incident notification and includes activities demonstrating how HSRs can contribute to incident investigation.Day five provides learners with the information and skills HSRs require regarding the issuing of Provisional Improvement Notices (PINs) and directing unsafe work to cease where negotiation and issue resolution has been unsuccessful or immediate action is required.The course concludes with a summary and review of the course learning outcomes and discussion on sources of information that can assist HSRs in the continuous learning process.

TRG Hot Work (Cutting and Welding) at Mines and Petroleum Sites Awareness Training Course (Formerly MDG 25) minimises the risks to health and safety of people where cutting and welding activities are being carried out at mine and petroleum sites.On completion of this training course, you will have an understanding of:Safe use and handling of oxygen fuel equipmentSafe cylinder storage, transport and handlingElectrical welding safetyPower tool and grinder safetyIdentification of risks and hazardsHow to complete a Hot Work PermitThe course covers the following topics:Compliance documentationWelding Management Plan (WMP)Hazard identification, risk assessment and risk controlsFire and explosionHazardous areas, wet areas, confined spaces and working at heightsWelding underground in coal minesThe welding environmentPersonal protective equipment (PPE)Emergency preparednessEquipment inspections, storage, transportation and handling

The purpose of this course is to equip learners with an understanding of the learning objectives relating to ISO 45001: 2018, the New ISO Standard for Occupational Health and Safety Management Systems – Requirements, with Guidance for Use.Prior KnowledgeThere are no prior knowledge requirements for this course; however, it is advisable for learners to have knowledge of Annex SL.

This course involves the skills and knowledge required to confine small emergencies in a facility as well as working within the command, control and coordination structure of an Emergency Control Organisation (ECO).Small emergencies in a facility include incidents such as small fires that can be controlled using a fire extinguisher; chemical spills that can be controlled using facility personal protective clothing and equipment and a spill kit; or a vehicle accident where there is no significant injury or damage. An ECO's priority is the safety of facility occupants and visitors during an emergency which means ECO members are responsible for pre-emergency, emergency and post emergency actionsThis course has been developed to cover the facilities as specified in Australian Standard AS3745 and AS4083. For this course, as covered by AS3745 and/or AS4083, occupants are people attending a facility on a permanent or temporary basis such as an employee, contractor, student or resident, but not a visitor or patient and a facility is a building, structure or workplace that is, or may be, occupied by people (occupants).All aspects of this course must be undertaken in line with legislative requirements, organisational policies and procedures, and accepted safe work practices.Course Content:Undertaking pre-emergency planningPreparing for emergency situationsIdentifying and assessing an emergencyTaking appropriate actions in an emergencySafely confining emergenciesUsing initial response equipmentAssisting with post emergency activitiesReporting on the facility's emergency response.Assessment:Theory Assessments with multiple choice and short answer questionsPractical Assessments, with tasks including:A prestart inspection on a fire extinguisherCorrect use of portable fire extinguishersCorrect use of a fire blanketUndertake pre-emergency planningTake appropriate actions in an emergencyAssist with post emergency activities

The Standard 11 Surface Mining Induction provides training on the skills and knowledge required to meet the Queensland regulatory requirements for those aiming to work in open-cut coal mining operations in Queensland.Course Content:General mining overviewLegislationGeneral safetyManaging workplace hazardsRisk managementIsolation and tagging proceduresSite communication equipment and systemsTraffic and mobile equipment proceduresLifesaving first aidLocal emergency and incident responseFirefighting and fire preventionThe environmentThe work processPlease note: Lunch is catered for this course. Please contact us if you have any dietary requirements.AssessmentThis course includes the following competency-based assessments:Complete a Theory Assessment with multiple choice and short answer questionsComplete a Team Assessment on Hazard Identification and Risk Assessment.Complete a Take 5Complete 3 Safety TagsContribute to Pre-Start MeetingsComplete a Fire Extinguisher inspectionRespond to two First Aid incidents; including where you must perform at least 2 minutes of uninterrupted single rescuer cardiopulmonary resuscitation (CPR) (5 cycles of both compressions and ventilations) on an adult resuscitation manikin placed on the floor.

The objective of this course is to provide learners with the knowledge and skills required to perform first-party audits of Occupational Health & Safety Management Systems (OHS) against ISO 45001:2018, in accordance with ISO 19011 and ISO 17021, as applicable.Course ContentIntroduction to occupational health and safety management systemsProcess-based OH&S management systemsAudit evidence and audit trailsAudits: definition, principles and typesThe audit processPreparing for the auditDeveloping a checklistConducting the on-site audit (audit stage 2)Audit reviewRegistration, certification and auditor competence  

This course is designed to provide participants with the skills and knowledge required to complete non-electrical work safely in the vicinity of a live electrical apparatus. ​ It includes compliance with safe approach distances for the worker, plant, tools and equipment.Course Content:Preparing to work safely in the vicinity of live electrical apparatusIdentify hazardsSafe Approach Distances (SAD)Permit to Work SystemSafety Observers/SpottersPPEElectrical safety regulationsComplete work and documentation​AssessmentThis course includes the following competency-based assessments: A Theory Assessment with multiple choice and short answer questionsPractical Assessment working as a Safety Observer in the vicinity of live electrical apparatus on two occasionsCompleting two JSAs and PermitsDealing with an unplanned event on one occasion