Single Course Health and Safety Mining Nationally Recognised Training

Site Safety Supervisor Course (S123/G189)

This course is ideal for participants employed in the mining, construction and civil industries. It focuses on applying risk management processes, health and safety investigations and communicating information successfully. SGS Australia Pty Ltd RTO 2646

2 Days In-person Next: 14 Sep 2026 English Identifier: 59353110
Site Safety Supervisor Course (S123/G189)

Course Overview

What you'll learn

Upon successful completion of the course requirements, a Statement of Attainment will be issued for:

  • RIIRIS301E Apply risk management processes
  • RIIWHS301E Conduct safety and health investigations
  • RIICOM301E Communicate information

Nationally recognised training delivered by SGS Australia Pty Ltd (RTO# 2646) 

Recertification:
Each work site will have its own refresher period requirements, please check with the work site where you will be working. Generally, this course is refreshed every 5 years.

Recognition of Prior Learning:

Due to the duration and purpose of this course, Recognition of Prior Learning is not available. Offering RPL would introduce a financial disadvantage and unnecessary administrative complexity which can extend your assessment process and time to be longer than the course duration. To maintain uniform standards and ensure competency in critical safety skills, all Learners are required to complete the full training and assessment. Please contact us for further information.

Who This Course Is For

This course is suitable for those persons who:

  • Contribute to applying risk management processes as part of their responsibilities. This could be an employer, line manager, supervisor, safety representative or employee. This course applies to those who carry out or assist in carrying out risk assessment in the workplace.
  • Participate in work related health and safety investigations as part of their responsibilities.
  • Are working in an operational, supervisory or team leader capacity.

Pre-Requisites:

There are no pre-requisite units of competency for this course.

LLN Requirements:

Language, literacy and numeracy skills are required at a level to  read and understand complex safety procedures, WHS policies, and legislation. This includes the ability to write incident reports, and risk assessment documents. Participants must have the capability to effectively communicate safety requirements, conduct briefings, and consult with stakeholders.

Participants with a language, literacy and/or numeracy difficulty or other special needs should inform our training support staff prior to enrolling to discuss our support services if required.

Physical Requirements:

There are no physical requirements for this course.

Dress code:

Participants are required to wear clean clothing appropriate for the workplace, and enclosed shoes.

About this course

This course is designed to provide participants with the skills and knowledge required to apply risk management processes, conduct work related health and safety investigations as a result of an incident and to contribute to a safe workplace and communicate in the workplace in the mining, drilling and civil infrastructure industry.

Course Content:

  • Apply risk management process

    • Plan and prepare for risk management
    • Identify and assess unacceptable risk
    • Identify and recommend risk controls
    • Contribute to the implementation of risk controls
    • Review risk management documentation

  • Conduct safety and health investigations
    • Determine the objectives and develop investigation plan
    • Gather information
    • Evaluate information
    • Identify courses of action
    • Prepare and present investigation reports
  • Communicate information
    • Plan and prepare to communicate information
    • Communicate information to achieve work activity outcomes
    • Develop and perform work activity presentation
    • Participate in resolving conflicts

Please note: Lunch is catered for this course. Please contact us if you have any dietary requirements.

​​​​

Assessment:

  • A Theory Assessment with short answer questions
  • A Practical assessment that includes:
    • Two workplace incident investigations
    • Two Risk Assessments
    • Two Toolbox Talk/Meetings
    • Conflict Management Scenarios
    • Using Electronic Communication Systems

Not sure if this is right?

Let us help you find the perfect match.

Course Finder

Related courses in Health and Safety

View all
TRG Hot Work (Cutting and Welding) at Mines and Petroleum Sites Awareness Training Course (Formerly MDG 25) Health and Safety
1 Day In-person
TRG Hot Work (Cutting and Welding) at Mines and Petroleum Sites Awareness Training Course (Formerly MDG 25)
TRG Hot Work (Cutting and Welding) at Mines and Petroleum Sites Awareness Training Course (Formerly MDG 25) minimises the risks to health and safety of people where cutting and welding activities are being carried out at mine and petroleum sites.On completion of this training course, you will have an understanding of:Safe use and handling of oxygen fuel equipmentSafe cylinder storage, transport and handlingElectrical welding safetyPower tool and grinder safetyIdentification of risks and hazardsHow to complete a Hot Work PermitThe course covers the following topics:Compliance documentationWelding Management Plan (WMP)Hazard identification, risk assessment and risk controlsFire and explosionHazardous areas, wet areas, confined spaces and working at heightsWelding underground in coal minesThe welding environmentPersonal protective equipment (PPE)Emergency preparednessEquipment inspections, storage, transportation and handling
$308.00 Incl. GST (AUD)
Low Voltage Electrical Training Course Health and Safety
4 Hours In-person
Low Voltage Electrical Training Course
All electrical work, including repair, installation and alteration is to be undertaken strictly in accordance with the Work Health and Safety (Mines and Petroleum Sites) Regulation 2022 and associated Australian standards and site standards of engineering practice. This course will inform you of the specific standards and responsibilities that are relevant for authorisation as a low voltage electrical tradesperson in the mining industry.On completion of this training course, you will have an understanding of:Electrical tradesperson requirementsElectrical test and equipment requirementsAustralian standards and legislationThe course covers the following topics:Legislation and compliance documentationIP ratingsVoltage definitionsElectric shock protocolsPower restoration requirementsLighting plants, generators and welding machinesElectrical testing on energised low voltage equipmentAuto electrical equipmentElectrical installation modificationsPortable electrical equipmentElectrical test equipment and maintenanceArc flash and PPE requirements
$209.00 Incl. GST (AUD)
ISO 22000:2018 - Food Safety Management System - Implementation eLearning Course Food Safety and Food Hygiene Pathway
ISO 22000:2018 - Food Safety Management System - Implementation eLearning Course
Learn about the requirements of ISO 22000:2018 and how to plan for the implementation of the Food Safety Management System (FSMS) in your organisation.This course consists of two separate eLearning modules:ISO 22000:2018 - IntroductionISO 22000:2018 - ImplementationCompletion criteria: You will need to achieve a pass mark of 80% or more in the final assessment, to complete this course. You will then be able to download the course completion certificate. You have 12 months access to this course, effective from the date of purchase.OBJECTIVESBy the end of this course, you will be able to:Follow a systematic approach to establish processes that will provide assurance that food or drink that is consumed in accordance with its intended use will not cause harm to your customersIncorporate the Plan-Do-Check-Act (PDCA) model and risk-based thinking into the management system processes so that you can address risks and make the most of any opportunitiesCreate a culture where employees are encouraged to take an active role in maintaining food safety and complying with food safety legislationUse the Hazard Analysis & Critical Control Points (HACCP) system and guidelines to ensure that food is safe and suitable for consumptionSuccessfully plan and implement a management system based on an ISO standardManage the implementation and the project team using project management principles and techniquesEnsure changes to processes and procedures are communicated and everyone is trained so they can support and contribute to the management system objectivesComplete an objective evaluation of your organisation’s current performance, to ensure the processes are in place and operating as intendedPlan and prepare activities in readiness for the certification auditAUDIENCEAnyone who requires knowledge of the basics of ISO 22000:2018 and needs to understand how to implement the management system within their organisation.PRIOR KNOWLEDGEBefore starting this course it is recommended that learners have the following prior knowledge:The concepts of food safety management and protecting customers from harmHazard Analysis & Critical Control Points (HACCP) system and guidelines
1 ISO 22000:2018 - Food Safety Management Systems - Introduction eLearning Course 2 ISO 22000:2018 - Food Safety Management System - Implementation eLearning Course
$231.00 Incl. GST (AUD)
Need Help Choosing the Right Course?
Our expert advisors can help you discover the perfect course to achieve your goals. Contact us today!
Contact Us
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.