All courses

The objective of this course is to provide learners with an overview of the purpose and requirements of ISO 14001:2026.However, this course does not address ISO 14001:2026 in detail.Course detailsDuration: 1 dayAccreditation: SGS certificate of attendance upon completionPrior KnowledgeBefore starting this course, you are expected to have the following prior knowledge:▪ Management Systems - understand the Plan-Do-Check-Act (PDCA) cycle.▪ Knowledge of the concepts of environmental management and the relationship between an organisation’s activities,  products and services and environmental impacts.▪ Commonly used environmental management terms and definitions, as given in ISO 14001:2026.▪ The requirements of ISO 14001:2026.Course ContentIntroduction to the ISO 14000 Series of Management System StandardsISO 14001:2026 Overview and Clause 4ISO 14001:2026 – Clauses 5, 6 and 7ISO 14001:2026 – Clause 8ISO 14001:2026 – Clauses 9 and 10

The objective of this course is to provide learners with the knowledge and skills required to perform an internal audit of part of an Environmental Management System (EMS) based on ISO 14001:2026, report on the effective implementation and maintenance of the managementsystem in accordance with ISO 19011 and to contribute to the continual improvement of the management system.Course DetailsDuration: 2 DaysAccreditation: SGS certificate of attendance upon completionPrior KnowledgeBefore starting this course, learners are expected to have the following prior knowledge:Management systems:- understand the Plan-Do-Check-Act (PDCA) cycle;- knowledge of environmental management systems (EMS) and the requirements of ISO 14001:2026.Environmental management:- the concept of environmental, sustainable development whereby an organisation must ensure that actions of today do not degrade the environment of the future;- the purpose of an initial review as the basis for establishing an EMS where none currently exists;- evaluation of activities, products and services to establish the environmental aspects associated with normal operating conditions, abnormal conditions such as start-up and shutdown and emergency situations and accidents;- considerations of environmental aspects with respect to:- emission to air, release to water and release to land;- use of raw materials, natural resources and energy;- energy emitted and lost e.g. heat, radiation, vibration, steam, and compressed air;- public nuisance such as light pollution, noise, and odour.- environmental legislation and how legal compliance forms part of an EMS;- typical methods for evaluation of the significant impacts of the environmental aspects identified and how their ranking influences operational control and priorities for improvement.Course ContentIntroduction to the ISO 14000 Series of Management System StandardsISO 14001:2026 – Interpretation for AuditAudit Definition and PrinciplesPlanning and Preparation for the AuditConducting the AuditAudit Reporting and Follow-upAuditor Competence

The purpose of this course is to provide learners who have an existing, basic knowledge of, or experience in, environmental management with an understanding of the management systems approach and the requirements of ISO 14001:2026, and to provide a basis for learners who wish to implement an Environmental Management System.Course DetailsDuration: 2 daysAccreditation: SGS certificate of attendance upon completionPrior KnowledgeBefore starting this course, learners are expected to have the following prior knowledge:▪ Management Systems – the Plan-Do-Check-Act (PDCA) cycle.▪ The core elements of a management system and the interrelationship between management responsibility, policy,planning, implementation, measurement, review and continual improvement.▪ Environmental Management:- knowledge of the concepts of energy management and the relationship between an organisation’s activities,products and services and equipment on energy efficiency;- commonly used energy management terms and definitions, as given in ISO 14001:2026;- the requirements of ISO 14001:2026.Course ContentBenefits and Importance of CertificationAnalyse the Current Business StateCreate the Implementation PlanDesign and Document the SystemSelecting a Certification Body

This intensive course is designed to provide participants with an in-depth understanding of the ISO 13485:2016 standard, focusing on the requirements for a medical device quality management system and the skills needed to lead audit teams effectively. The course combines comprehensive theoretical knowledge with practical auditing exercises, role-playing, and group discussions to ensure participants are well-equipped to conduct and lead internal and external audits.SGS North America is certified by Exemplar Global as a training provider. Participants who successfully complete this course and achieve Competency through the course exam will receive a Certificate of Attainment for the following Exemplar Global knowledge competency unit:MD - Medical Devices Quality Management SystemsAU – Auditing Management SystemsTL – Leading Management Systems Audit TeamsImportant Notes:We recommend that you turn your camera on during the course to enhance engagement and participation.For the course exam, all learners are required to keep their camera on for the entire duration of the exam.Please bring a valid photo ID (e.g., driver’s license, passport, or work badge) to class for identity verification purposes prior to the exam.Enrollment and attendance in this course indicate participant agreement for SGS Academy NAM to share enrollment information (e.g., participant name, email address, Competency Units attempted, TPECS examination results, etc.) with Exemplar Global. This information will not be shared with any third party (e.g., employer) without the participant’s written consent, unless required by law.

This course has been developed by SGS for the benefit of clients wishing to understand the FSSC 22000 Certification Scheme and its requirements. On 1st May 2026 FSSC released an updated version from v6 to v7. This course aims to provide learners with an overview of the main changes from FSSC 22000 v6 to v7, including all major “new” and “enhanced” requirements, key process updates and changes to categories and subcategories.Prior KnowledgePrior to attending this training course, learners should have a good understanding of their food safety management system documents related to the requirements of the scheme.Course CertificationOn completion of this course learners will be issued with a “Certificate of Attendance”.

This course has been developed by SGS for the benefit of clients wishing to understand the FSSC 22000 Certification Scheme and its requirements.  In May 2026, the scheme was substantially updated from version 6 (v6) to version 7 (v7). This course aims to assist organisations and individuals to understand the new and updated requirements under FSSC 22000 v7 and ISO 22003:2022, identifying and reviewing the specific requirements for Food Fraud Mitigation Food Defense and Food Safety Culture.Prior KnowledgePrior to attending this training course, learners should have (but not essential) sufficient knowledge of the following food safety management principles and concepts: Implementing or operating a management system within a food sector context. This includes schemes such as FSSC 22000, ISO 22000 and/or other schemes which include management system components.Knowledge of prerequisite programs (PRPs) as specified in ISO 22002-1.The principles of HACCP as defined by Codex Alimentarius Commission.Course CertificationOn completion of this course, learners will be issued with a “Certificate of Attendance”.

This course has been developed by SGS for the benefit of learners wishing to understand how to internally audit against FSSC 22000 and its requirements. In May 2026, the scheme was updated from Version 6 to Version 7. This training provides learners with the knowledge and skills required to perform an internal audit of part of a FSMS against FSSC 22000 v7 and ISO 22000:2018, in accordance with ISO 19011:2026, ISO 22002-1:2025, as applicable and contribute to the continual improvement of the management system.Prior KnowledgeThis course is designed ideally for experienced food safety professionals with an understanding of the management systems approach to food safety.  Prior to attending this training course, learners should have, but it is not essential, sufficient knowledge of the following food safety management principles and concepts to ensure that this training is as beneficial as possible.Management principles and concepts:- Plan-Do-Check-Act (PDCA) cycle,Food safety management concepts, including:- HACCP Principles- Hazard analysis- Hazard and risk assessment, and management etc.- The relationship between food safety management, customer satisfaction and customer food safety requirements.Commonly used food safety management terms and definitions, as given in ISO 22000:2018 and FSSC v7.FSSC version 7 and ISO 22000:2018:- The requirements of FSSC version 7 and ISO 22000:2018 which may be gained by completing a Foundation Training course or equivalent.Course CertificationOn completion of this course learners will be issued with a “Certificate of Attendance”.

This course aims to provide learners who have an existing, basic knowledge of the Food Safety Management System (FSMS), with an understanding of the management systems approach and related requirements, and to provide a basis for learners who wish to implement an FSMS. The FSMS discussed in this course is based on the requirements of the FSSC 22000 Certification Scheme. In May 2026, the scheme was updated from Version 6 to Version 7.Prior KnowledgeManagement System based on the process approach that incorporates the Plan-Do-Check-Act (PDCA) cycle and risk-based thinking.The core elements of a management system and the interrelationship between management responsibility and commitment, policy, planning, implementation, measurement, review and continual improvement.The framework of the Food Safety Management System:- HACCP Principles- ISO 22000:2018 Food Safety Management System- Prerequisite Programmes (PRPs)Course CertificationOn completion of this course learners will be issued with a “Certificate of Attendance”.

The aim of this course is to provide learners with the knowledge and skills required to perform first, second and third-party audits of FSMS against FSSC 22000 v7, in accordance with ISO 19011, ISO/TS 22003 and ISO/IEC 17021, as applicable.Learners who complete this CQI and IRCA Certified FSSC 22000 Lead Auditor Training course successfully (within the five years before making an application to become a certificated auditor) will satisfy the training requirements for initial certification as an IRCA FSMS auditor (Part 1) or IRCA FSMS certified auditor (Part 2) of the scheme. For the full requirements, please refer to quality.org/IRCA-grades.Recommended Prior KnowledgeKnowledge of the following food safety management principles and concepts:The Plan, Do, Check, Act (PDCA) cycleThe core elements of a management system and the interrelationship between top management responsibility, policy, objectives, planning, implementation, measurement, review and continual improvement.Food safety management:Knowledge of the principles of food safety management including pre-requisite programmes as specified in ISO 22000:2018 / TS 22002 (all parts) and HACCP;The relationship between food safety management and the provision of food safe products to prevent or minimise adverse effects on human health and the proactive improvement of food safety performance;Awareness of common examples of relevant national and local FSMS legislation and requirements.Knowledge of the requirements of FSSC 22000 v7 or acceptable equivalent, and the commonly used food safety management terms and definitions, as given in ISO 22000:2018, which may be gained by completing a CQI and IRCA certified ISO 22000:2018 (FSMS) training course or equivalent.Enrolment informationBy enrolling on this course you agree to your personal information being passed to CQI and IRCA.Trusted FSSC 22000  training from a leading course providerOur courses are delivered by tutors who are environmental management system experts and experienced trainers. Your knowledge and skills will be developed through an interactive and practical approach to learning. Case study materials and role-play exercises are used to develop and practice skills in all phases of auditing. Participants are continually assessed and required to complete an end-of-course written examination.Contact your local SGS office for full details of the courses available in your region

This course is certificated by the Chartered Quality Institute (CQI) and International Register of Certificated Auditors (IRCA); Course Certification Number, 2647 – PR 375.Learners who successfully complete this FSSC 22000 v6  Auditor/Lead Auditor Training Course will satisfy part of the formal training requirements for initial certification as a CQI and IRCA Certificated FSMS Lead Auditor.The aim of this course is to provide learners with the knowledge and skills required to perform first, second and third-party audits of FSMS against FSSC 22000 v6, in accordance with ISO 19011:2018, ISO/TS 22003 and ISO/IEC 17021-1:2015, as applicable.Prior Knowledge It will benefit learners if they have knowledge of the following principles and concepts:Knowledge of the following food safety management principles and concepts:Plan-Do-Check-Act (PDCA) cycle;the core elements of a management system and the interrelationship between top management responsibility, policy, objectives, planning, implementation, measurement, review and continual improvement.Food safety management:knowledge of the principles of food safety management including pre-requisite programmes as specified in ISO 22000:2018 / TS 22002 (all parts) and HACCP;the relationship between food safety management and the provision of food safe products to prevent or minimise adverse effects on human health and the proactive improvement of food safety performance;awareness of common examples of relevant national and local FSMS legislation and requirements.Knowledge of the requirements of FSSC 22000 v6 or acceptable equivalent, and the commonly used food safety management terms and definitions, as given in ISO 22000:2018, which may be gained by completing a CQI and IRCA certified ISO 22000:2018 (FSMS) training course or equivalent.Course CertificationOn completion of this course:Learners who pass both the examination and continuous assessment will be issued with a “Certificate of Achievement” that satisfies the formal training for an individual seeking certification as a CQI and IRCA Auditor / Lead Auditor. The “Certificate of Achievement” is valid for a period of five years from the date of the examination for the purpose of certifying as an Auditor with the CQI and IRCA.Learners who do not pass the continuous assessment and have been in attendance for the full duration of the course will be issued with a “Certificate of Attendance”.Learners who fail the written examination and pass the continuous assessment will receive a “Certificate of Attendance” and will be allowed to re-sit the examination within 12 months of the end date of the first examination.

This highly participative training course provides an introduction and overview of Food Defence and explores guidelines, legal requirements and standards in use alongside GFSI expectations. The course explores authenticity plans to help map your supply chain and the importance of Food Defence plans.