All courses

This course is designed to provide participants with refreshed and updated skills and knowledge required for entering and working in confined spaces in the resources and infrastructure industries. It includes planning and preparing for entry, work and exiting confined spaces including working in accordance with an issued permit, Standby duties, gas monitoring and the issuing of permits.Course Content:Legislation, standards, codes of practice and proceduresAssessing, entering, working and exiting confined spacesStandby dutiesSignageLock, tag out and isolation proceduresPurging and ventilationIssuing and working in accordance with a permitEquipment used in or near confined spacesHazard analysis, risk assessment and risk controlsProcedures for atmospheric monitoringUnderstanding and use of gas monitoring equipmentMaintenance of gas monitoring equipmentUse of ropes and knotsAssessment:A Theory Assessment with multiple choice and short answer questionsPractical Assessments, with tasks including:Pre-Start equipment inspectionsCompleting personal risk assessment documentation such as Take 5's and JSA'sTaking part in two (2) simulated confined space entries under supervision and instructionIssuing and observing work permits as part of the above Confined space entries

TRG Hot Work (Cutting and Welding) at Mines and Petroleum Sites Awareness Training Course (Formerly MDG 25) minimises the risks to health and safety of people where cutting and welding activities are being carried out at mine and petroleum sites.On completion of this training course, you will have an understanding of:Safe use and handling of oxygen fuel equipmentSafe cylinder storage, transport and handlingElectrical welding safetyPower tool and grinder safetyIdentification of risks and hazardsHow to complete a Hot Work PermitThe course covers the following topics:Compliance documentationWelding Management Plan (WMP)Hazard identification, risk assessment and risk controlsFire and explosionHazardous areas, wet areas, confined spaces and working at heightsWelding underground in coal minesThe welding environmentPersonal protective equipment (PPE)Emergency preparednessEquipment inspections, storage, transportation and handling

The Standard 11 Surface Mining Induction provides training on the skills and knowledge required to meet the Queensland regulatory requirements for those aiming to work in open-cut coal mining operations in Queensland.Course Content:General mining overviewLegislationGeneral safetyManaging workplace hazardsRisk managementIsolation and tagging proceduresSite communication equipment and systemsTraffic and mobile equipment proceduresLifesaving first aidLocal emergency and incident responseFirefighting and fire preventionThe environmentThe work processPlease note: Lunch is catered for this course. Please contact us if you have any dietary requirements.AssessmentThis course includes the following competency-based assessments:Complete a Theory Assessment with multiple choice and short answer questionsComplete a Team Assessment on Hazard Identification and Risk Assessment.Complete a Take 5Complete 3 Safety TagsContribute to Pre-Start MeetingsComplete a Fire Extinguisher inspectionRespond to two First Aid incidents; including where you must perform at least 2 minutes of uninterrupted single rescuer cardiopulmonary resuscitation (CPR) (5 cycles of both compressions and ventilations) on an adult resuscitation manikin placed on the floor.

This course will inform you of specific electrical standards and responsibilities that relate to authorisations to maintain, modify or install extra low voltage mobile and transportable electrical installations.On completion of this training course, you will have an understanding of:Auto electrical requirementsElectrical test equipment requirementsAustralian standards and legislationThe course covers the following topics:Legislation and compliance documentationVoltage definitionsElectric shockAuto electricalElectrical installation modificationsElectrical test equipment and maintenance

This course is designed to provide participants with the skills and knowledge required to work safely at heights in the resources and infrastructure industries. You will learn how to use safe work practices to effectively eliminate or control the risks associated with workplace falls and comply with Work Health and Safety (WHS) requirements.Course Content:LegislationPolicies and proceduresSafety systems and equipmentFall prevention measures and devicesFall arrest systemsLadder risk controlsCorrect use of laddersEquipment selection, inspection and maintenanceHazard identification, risk assessment and controlsHandling and securing equipment and materialsEmergency proceduresCorrect fitting of full body harnessesAssessment:This course includes the following competency-based assessments: A Theory Assessment with multiple choice and short answer questionsPractical Assessment, with tasks including:Pre-Start equipment inspectionsCompleting personal risk assessment documentation such as Take 5's and JSA'sCorrectly donning PPE, including a fall arrest harnessSetting up and using fall-prevention and arrest systemsClimbing ladder systems on at least two (2) occasions

All electrical work, including repair, installation and alteration is to be undertaken strictly in accordance with the Work Health and Safety (Mines and Petroleum Sites) Regulation 2022 and associated Australian standards and site standards of engineering practice. This course will inform you of the specific standards and responsibilities that are relevant for authorisation as a low voltage electrical tradesperson in the mining industry.On completion of this training course, you will have an understanding of:Electrical tradesperson requirementsElectrical test and equipment requirementsAustralian standards and legislationThe course covers the following topics:Legislation and compliance documentationIP ratingsVoltage definitionsElectric shock protocolsPower restoration requirementsLighting plants, generators and welding machinesElectrical testing on energised low voltage equipmentAuto electrical equipmentElectrical installation modificationsPortable electrical equipmentElectrical test equipment and maintenanceArc flash and PPE requirements

This course is designed to provide participants with the skills and knowledge required to perform a rescue from live low voltage (LV) electrical apparatus using a Low Voltage Rescue Kit in an electrical industry environment. It includes the organisational workplace requirements for the inspection and use of live LV panel rescue equipment, and how it applies to electricity supply industry (ESI) workers and/or electrical industry workers to meet work health and safety (WHS)/occupational health and safety (OHS), mobility and mutual aid requirements.Participants will also learn how to perform cardiopulmonary resuscitation (CPR) on a person who is unconscious and not breathing normally in line with Australian Resuscitation Council (ARC) Guidelines.Course Content:Identifying organisational rescue requirementsIdentifying hazards, assessing risks and applying control measuresIdentifying the isolation pointConfirming voltage(s) and related safe approach distance(s)Obtaining and inspecting rescue equipmentFitting of rescue personal protective equipment (PPE)Performing a rescue from a live low voltage (LV) panel in accordance with workplace requirementsDRSABCD action planManaging the unconscious breathing casualtyCardiopulmonary resuscitation (CPR) stepsDemonstration and use of an Automated External Defibrillator (AED)AssessmentThis course includes the following competency-based assessments: A Theory Assessment with multiple choice and short answer questionsPractical Assessment, with tasks including:Perform a simulated rescue from a live low voltage (LV) panel in accordance with workplace requirementsPerform at least 2 minutes of uninterrupted single rescuer cardiopulmonary resuscitation (CPR) (5 cycles of both compressions and ventilations) on an adult resuscitation manikin placed on the floorPerform at least 2 minutes of uninterrupted single rescuer CPR (5 cycles of both compressions and ventilations) on an infant resuscitation manikin placed on a firm surfaceFollow single rescue procedure including the demonstration of a rotation of operators with minimal interruptions to compressionsFollow the prompts of an automated external defibrillator (AED)

This course provides participants with the refreshed and updated skills and knowledge required for working safely at heights in the resources and infrastructure industries.Participants will refresh their knowledge regarding how to effectively eliminate or control risks associated with workplace falls by carrying out WHS requirements through safe work practices.Course ContentLearners will refresh their knowledge and skills on the following topics:LegislationPolicies and proceduresSafety systems and equipmentFall prevention measures and devicesFall arrest systemsLadder risk controlsCorrect use of laddersEquipment selection, inspection and maintenanceHazard identification, risk assessment and controlsHandling and securing equipment and materialsEmergency proceduresCorrect fitting of full body harnessesAssessment:This course includes the following competency-based assessments: A Theory Assessment with multiple choice and short answer questionsPractical Assessment, with tasks including:Pre-Start equipment inspectionsCompleting personal risk assessment documentation such as Take 5's and JSA'sCorrectly donning PPE, including a fall arrest harnessSetting up and using fall-prevention and arrest systemsClimbing ladder systems on at least two (2) occasions

DescriptionThis course is designed to provide participants with the skills and knowledge required for entering and working in confined spaces in the resources and infrastructure industries. It includes planning and preparing for entry, work and exiting confined spaces including working in accordance with an issued permit, Standby duties, gas monitoring and the issuing of permits.Course Content:Legislation, standards, codes of practice and proceduresAssessing, entering, working and exiting confined spacesStandby dutiesSignageLock, tag out and isolation proceduresPurging and ventilationIssuing and working in accordance with a permitEquipment used in or near confined spacesHazard analysis, risk assessment and risk controlsProcedures for atmospheric monitoringUnderstanding and use of gas monitoring equipmentMaintenance of gas monitoring equipmentUse of ropes and knotsAssessment:A Theory Assessment with multiple choice and short answer questionsPractical Assessments, with tasks including:Pre-Start equipment inspectionsCompleting personal risk assessment documentation such as Take 5's and JSA'sTaking part in two (2) simulated confined space entries under supervision and instructionIssuing and observing work permits as part of the above Confined space entries

This course is designed to provide participants with refreshed and updated skills and knowledge required for entering and working in confined spaces in the resources and infrastructure industries. It includes planning and preparing for entry, work and exiting confined spaces including working in accordance with an issued permit, standby duties, gas monitoring, issuing of permits,  the use of breathing apparatus and confined spaces rescue.Course Content:Legislation, standards, codes of practice and proceduresAssessing, entering, working and exiting confined spacesStandby dutiesSignageLock, tag out and isolation proceduresPurging and ventilationIssuing and working in accordance with a permitEquipment used in or near confined spacesHazard analysis, risk assessment and risk controlsProcedures for atmospheric monitoringUnderstanding and use of gas monitoring equipmentMaintenance of gas monitoring equipmentUse of ropes and knotsSelection, use and maintenance of respiratory devicesResponding to an emergency situationAssessment:A Theory Assessment with multiple choice and short answer questionsPractical Assessments, with tasks including:Pre-Start equipment inspectionsCompleting personal risk assessment documentation such as Take 5's and JSA'sTaking part in two (2) simulated confined space entries under supervision and instructionIssuing and observing work permits as part of the above Confined space entriesUsing breathing apparatus to meet operational requirementsRescuing a person from a confined space

This course is designed to provide participants with the skills and knowledge required to apply risk management processes, conduct work related health and safety investigations as a result of an incident and to contribute to a safe workplace and communicate in the workplace in the mining, drilling and civil infrastructure industry.Course Content:Apply risk management processPlan and prepare for risk managementIdentify and assess unacceptable riskIdentify and recommend risk controlsContribute to the implementation of risk controlsReview risk management documentationConduct safety and health investigationsDetermine the objectives and develop investigation planGather informationEvaluate informationIdentify courses of actionPrepare and present investigation reportsCommunicate informationPlan and prepare to communicate informationCommunicate information to achieve work activity outcomesDevelop and perform work activity presentationParticipate in resolving conflictsPlease note: Lunch is catered for this course. Please contact us if you have any dietary requirements.​​​​Assessment:A Theory Assessment with short answer questionsA Practical assessment that includes:Two workplace incident investigationsTwo Risk AssessmentsTwo Toolbox Talk/MeetingsConflict Management ScenariosUsing Electronic Communication Systems