Health and Safety courses

We offer a 10% "Early Bird" discount to all registrations made 6 weeks before training starts. Online trainings are not includedThe agenda for the future safety-engineering design is set as early as during the concept creation stage. This module addresses all those who are involved in risk determination (SIL Determination) and the system requirements to be derived from this process.Our training courses take place with a minimum of three registered participants. You will receive confirmation of your registration approximately four weeks before the training course begins. Online training courses take place via MS Teams.Recording and duplicating training courses is not permitted. We reserve the right to take legal action in the event of non-compliance.

We offer a 10% "Early Bird" discount to all registrations made 6 weeks before training starts. Online trainings are not included.This module does not focus on hardware development itself but on the verification of the hardware concept which is carried out using mathematical models. A practical example is used to present and practice the probabilistic demonstration of safety. Furthermore different analytical methods are discussed.Our training courses take place with a minimum of three registered participants. You will receive confirmation of your registration approximately four weeks before the training course begins. Online training courses take place via MS Teams.Recording and duplicating training courses is not permitted. We reserve the right to take legal action in the event of non-compliance.

We offer a 10% "Early Bird" discount to all registrations made 6 weeks before training starts. Online trainings are not includedIn the case of safety-relevant systems the demands made on the software development process exceed the quality requirements which are high to begin with. In this training module the application of the software safety lifecycle and the interpretation of the techniques and methods to be selected are explained in an illustrative manner.Our training courses take place with a minimum of three registered participants. You will receive confirmation of your registration approximately four weeks before the training course begins. Online training courses take place via MS Teams.Recording and duplicating training courses is not permitted. We reserve the right to take legal action in the event of non-compliance.

Abschluss einer SOTIF PRO – Personen-Qualifizierung

This course is certified by the Chartered Quality Institute (CQI) and International Register of Certificated Auditors (IRCA). CQI and IRCA Course Certification Number 2608 – PR 356.The aim of this course is to provide learners with the knowledge and skills required to perform first, second and third-party audits of Occupational Health & Safety Management Systems (OH&S) against ISO 45001:2018, in accordance with ISO 19011 and ISO 17021-1, as appropriate.Course certificationOn completion of this course:Learners who pass both the examination and continuous assessment will be issued with a “Certificate of Achievement” that satisfies the formal training for an individual seeking certification as a CQI and IRCA Auditor. The “Certificate of Achievement” is valid for a period of five years from the date of the last day of the examination for certifying as an Auditor/Lead Auditor with the CQI and IRCA.Learners who do not pass the continuous assessment and have been in attendance for the full duration of the course will be issued with a “Certificate of Attendance”.Learners who fail the written examination and pass the continuous assessment will receive a “Certificate of Attendance” and will be allowed to re-sit the examination within 12 months of the end date of the first examination.DisclaimerFor learners undertaking the CQI and IRCA Online Assessment, all aspects relating to examination, proctoring, disqualification decisions, appeals and the issuance of results to the Approved Training Partner (ATP) are the sole responsibility of CQI and IRCA. SGS does not have oversight of, or involvement in, these processes.Recommended prior knowledgeIt is recommended that learners have knowledge of the following:OH&S management principles and concepts:The concept of OH&S sustainable development whereby an organisation must ensure that actions of today do not degrade the environment of the future.The purpose of an initial review as the basis for establishing an OH&S management system where none currently exists.Evaluation of activities, products and services to establish the risks and hazards associated with normal operating conditions and abnormal conditions, such as start-up and shutdown, and emergency situations and accidents.Consideration of risks and hazards in respect of:Workplace locations and activities.Work-related activities carried out away from the normal place of work or base.Employees, visitors and other interested parties in areas where the organisation has control and influence over health and safety.Vulnerable individuals within the workplace or control of the organisation.OH&S legislation and how legal compliance forms part of an OH&S management system.A good appreciation of typical methods of evaluation of risks and hazards and their mitigation, and the identification of improvements (e.g. risk assessments and method statements).Knowledge of the requirements of ISO 45001:2018, which may be gained by completing a CQI and IRCA certified OH&S Foundation Training Course or equivalent.Learners for this conversion course should have completed a full 5-day IRCA certified Auditor/Lead Auditor course in another scheme prior to attending this course. This is a pre-requisite requirement to register on the CQI and IRCA Auditor certification scheme.

We offer a 10% "Early Bird" discount to all registrations made 6 weeks before training starts. Online trainings are not includedWe qualify you or your employees to work with functional safety. To this end, we at SGS-TÜV Saar have developed a two-stage qualification programme. Upon successful completion of the qualification, the SGS-TÜV Saar seal certifies that the graduate is an expert in functional safety.Our training courses take place with a minimum of three registered participants. You will receive confirmation of your registration approximately four weeks before the training course. Online training courses take place via MS Teams.Recording and duplicating training courses is not permitted. We reserve the right to take legal action in the event of non-compliance.

We offer a 10% "Early Bird" discount to all registrations made 6 weeks before training starts. Online trainings are not includedWe qualify you or your employees to work with safe artificial inteligence in semicondictors.  After a successfull completion, the SGS-TÜV Saar seal confirms that the graduate is an AI professional in the development of functional safe semiconductors.Our training courses take place with a minimum of three registered participants. You will receive confirmation of your registration approximately four weeks before the training course begins. Online training courses take place via MS Teams. Recording and duplicating training courses is not permitted. We reserve the right to take legal action in the event of non-compliance.

We offer a 10% "Early Bird" discount to all registrations made 6 weeks before training starts. Online trainings are not includedISO 25119 is a complex set of standards and hard to comprehend for beginners in the field of Functional Safety. This training module initially introduces the basics of Functional Safety and then explains the core statements of the standards.Our training courses take place with a minimum of three registered participants. You will receive confirmation of your registration approximately four weeks before the training course begins. Online training courses take place via MS Teams.Recording and duplicating training courses is not permitted. We reserve the right to take legal action in the event of non-compliance.

We offer a 10% "Early Bird" discount to all registrations made 6 weeks before training starts. Online trainings are not includedThe more complex the technology, the more experts are needed for functional safety in the industrial sector and in agricultural and forestry management. But the question is, who is an expert in functional safety? ISO 25119 does not answer the question. On the one hand, it is required that only experts assess or manage functional safety, and on the other, they do not set out the conditions under which someone is considered an expert.Our training courses take place with a minimum of three registered participants. You will receive confirmation of your registration approximately four weeks before the training course begins. Online training courses take place via MS Teams.Recording and duplicating training courses is not permitted. We reserve the right to take legal action in the event of non-compliance.

Bislang sind Experten, die das Wissen über funktionale Sicherheit und künstliche Intelligenz in der Entwicklung von Halbleitern vereinen, noch rar gesät.Als akkreditierter Dienstleister bietet Ihnen SGS-TÜV Saar nun die Möglichkeit, Personen mit dem Fachwissen für KI im Kontext der funktionalen Sicherheit in Halbleitern auszubilden und sie damit zu qualifizieren. Mit dieser Qualifikation können Sie als Einzelperson Ihren Marktwert nachweisen oder sogar steigern. Als Unternehmen haben Sie die Möglichkeit, Ihre Mitarbeiter unabhängig qualifizieren zu lassen und sich deren Fachwissen langfristig zu sichern.