All courses

H&SM This is a SGS approved Training Course. The purpose of this module is to equip particiants with an understanding of the learning objectives relating to ISO 45001:2018, the new ISO Standard for Occupational Health and Safety Management Systems - Requirements with guidance for use. To sucessfully complete the migration to ISO 45001:2018, both of the below modules must be achieved: Annex SL Module 1 Auditor Transition Course (1 day) ISO 45001:2018 Module 2 Auditor Migration Course (1 day) Prior knowledge Learners should have an in-depth knowledge of OHSAS 18001:2007 and it is advisable to have knowledge of Annex SL.

This course aims to provide learners who have an existing, basic knowledge of, or experience in, business continuity management with an understanding of the management systems approach and the requirements of ISO 22301, and to provide a basis for learners who wish to go on to complete CQI and IRCA Certified BCMS Auditor courses.

This course is certificated by the Chartered Quality Institute (CQI) and International Register of Certificated Auditors (IRCA).  CQI and IRCA Course Certification Number 2300 - PR 363.Course CriteriaUpon completion of the course. learners will be able to:1) Explain the purpose of business continuity management systems standards, of management system audit, of third-party certification and the business benefits of improved performance of the business continuity management system.2) Explain the role and responsibilities of an auditor to plan, conduct, report and follow up a BCMS audit in accordance with ISO 19011 (and ISO 17021 where appropriate).3) Plan, conduct, report and follow up an audit of a BCMS to establish conformity with ISO 22301 and in accordance with ISO 19011 ) and ISO 17021 where appropriate).Learners will need to demonstrate acceptable performance in these areas to complete the course successfully.Prior KnowledgeBefore starting this course, learners are expected to have the following prior knowledge of the:1) Requirements of ISO 22301:20192) Following business continuity management (BCM) principles and concepts:the purpose and benefits of a business impact analysis;the principals of risk assessment and analysis;typical business continuity strategies;business continuity response options;BCMS performance metrics, monitoring and performance measurements;exercise and testing methodologies.

This training aims to familiarise learners with auditing management systems guidelines in accordance with ISO 19011:2026.Course ContentSession One: Management Systems AuditingSession Two: Principles of AuditingSession Three: Managing an Audit ProgrammeSession Four: Establishing the Audit ProgrammeSession Five:  Implementing the Audit ProgrammeSession Six: Selecting the Audit TeamSession Seven: Conducting the AuditSESSION EIGHT: Audit ConclusionsPrior KnowledgeNot applicable for this course.Course CertificationOn completion of this course learners will receive a “Certificate of Attendance”.

This single module course has been developed by SGS for the benefit of individuals wishing to understand the changes and amendments transitioning from ISO 19011:2018 to ISO 19011:2026.Course ContentSession 1: ISO 19011:2026 updates and variations to ISO 19011:2018Prior KnowledgeIt will benefit learners if they have knowledge of the ISO 19011:2018 standard.Course CertificationOn completion of this course learners will be issued with a “Certificate of Attendance”.

MDRMThis course provides a comprehensive introduction to the key elements of Risk Management for Medical Devices, using the harmonised standard ISO 14971:2019, and aims to give delegates a practical foundation in the relationship between risk management, the regulatory requirements and their Quality System.

GHGLV This training course includes modules on an Introduction to Carbon Accounting, GHG inventories and GHG Verification. The GHG verification module content enables participants to understand and apply the verification process according to ISO 14064-3. This includes: Verification Preparation Developing a Verification Approach Strategic Review and Risk Analysis Verification and Sampling Plans Methods for Data and Compliance Verification Materiality Findings Verification Statements The training comprises lecture and workshop exercises. This course is available on-site, tailored to your company’s scope and requirements.  Please contact us for more details on how the SGS Academy can assist with your certification plans - ukacademy@sgs.com / 01276 697 777

The objective of this course is to provide learners with an understanding of the current changes from ISO 14001:2015 to ISO 14001:2026, to be able to maintain compliance with an existing Environmental Management System (EMS).Course DetailsDuration: Half dayAccreditation: SGS certificate of attendance upon completionPrior KnowledgeThere is no prior knowledge expected for this course.Course Content▪ ISO 14001:2026 updates and variations to ISO 14001:2015▪ Introduction of modernised terminology and the “Harmonized Structure”

The objective of this course is to provide learners with an overview of the purpose and requirements of ISO 14001:2026.However, this course does not address ISO 14001:2026 in detail.Course detailsDuration: 1 dayAccreditation: SGS certificate of attendance upon completionPrior KnowledgeBefore starting this course, you are expected to have the following prior knowledge:▪ Management Systems - understand the Plan-Do-Check-Act (PDCA) cycle.▪ Knowledge of the concepts of environmental management and the relationship between an organisation’s activities,  products and services and environmental impacts.▪ Commonly used environmental management terms and definitions, as given in ISO 14001:2026.▪ The requirements of ISO 14001:2026.Course ContentIntroduction to the ISO 14000 Series of Management System StandardsISO 14001:2026 Overview and Clause 4ISO 14001:2026 – Clauses 5, 6 and 7ISO 14001:2026 – Clause 8ISO 14001:2026 – Clauses 9 and 10

The objective of this course is to provide learners with the knowledge and skills required to perform an internal audit of part of an Environmental Management System (EMS) based on ISO 14001:2026, report on the effective implementation and maintenance of the managementsystem in accordance with ISO 19011 and to contribute to the continual improvement of the management system.Course DetailsDuration: 2 DaysAccreditation: SGS certificate of attendance upon completionPrior KnowledgeBefore starting this course, learners are expected to have the following prior knowledge:Management systems:- understand the Plan-Do-Check-Act (PDCA) cycle;- knowledge of environmental management systems (EMS) and the requirements of ISO 14001:2026.Environmental management:- the concept of environmental, sustainable development whereby an organisation must ensure that actions of today do not degrade the environment of the future;- the purpose of an initial review as the basis for establishing an EMS where none currently exists;- evaluation of activities, products and services to establish the environmental aspects associated with normal operating conditions, abnormal conditions such as start-up and shutdown and emergency situations and accidents;- considerations of environmental aspects with respect to:- emission to air, release to water and release to land;- use of raw materials, natural resources and energy;- energy emitted and lost e.g. heat, radiation, vibration, steam, and compressed air;- public nuisance such as light pollution, noise, and odour.- environmental legislation and how legal compliance forms part of an EMS;- typical methods for evaluation of the significant impacts of the environmental aspects identified and how their ranking influences operational control and priorities for improvement.Course ContentIntroduction to the ISO 14000 Series of Management System StandardsISO 14001:2026 – Interpretation for AuditAudit Definition and PrinciplesPlanning and Preparation for the AuditConducting the AuditAudit Reporting and Follow-upAuditor Competence

The purpose of this course is to provide learners who have an existing, basic knowledge of, or experience in, environmental management with an understanding of the management systems approach and the requirements of ISO 14001:2026, and to provide a basis for learners who wish to implement an Environmental Management System.Course DetailsDuration: 2 daysAccreditation: SGS certificate of attendance upon completionPrior KnowledgeBefore starting this course, learners are expected to have the following prior knowledge:▪ Management Systems – the Plan-Do-Check-Act (PDCA) cycle.▪ The core elements of a management system and the interrelationship between management responsibility, policy,planning, implementation, measurement, review and continual improvement.▪ Environmental Management:- knowledge of the concepts of energy management and the relationship between an organisation’s activities,products and services and equipment on energy efficiency;- commonly used energy management terms and definitions, as given in ISO 14001:2026;- the requirements of ISO 14001:2026.Course ContentBenefits and Importance of CertificationAnalyse the Current Business StateCreate the Implementation PlanDesign and Document the SystemSelecting a Certification Body